Section 26: Chimney Repair & Restoration
X
PCR POULTICE CREOSOTE REMOVER
SSHSPCR HeatShield PCR
25 lbs
$175.21
SHIPPING NOT INCLUDED
PCR is designed to completely remove 3rd degree glazed creosote from flue tiles or stainless steel chimney liners. When PCR is applied, it dissolves the creosote and absorbs it. As it absorbs the creosote and dries, it loses its adhesive properties and falls off the sides of the flue tiles. Any remaining PCR can be easily removed by chimney sweeping. PCR can be applied by brush in areas that are easily accessible, or with a specially designed tool that can be pulled up through the chimney by a winch. To remove glazed creosote in smoke chambers, PCR can be applied with SaverSystems’ Smoke Chamber Sprayer. PCR should be used where glazed creosote is present in order to eliminate the dangers of chimney fires.
Can be used on stainless steel liners For custom foam cuts contact SaverSystems, coverage rates 10’-15’ on an 11x11 and 15’-20’ on an 9 x 13.
Clean & Etch FLUE LINER CLEANER
SSCE1 HeatShield Clean & Etch
1 Gallon
$97.90
SHIPPING NOT INCLUDED
HeatShield Clean & Etch cleans and etches all clay flue liner interiors for improved adhesion. This product is designed for flue tiles with a glazing compound that was applied at the time the flue tile was manufactured. Clean & Etch cleans residual dust and soot (not glazed creosote – for this, use PCR) and chemically roughens the surface to improve the mechanical and chemical bond of HeatShield Cerfractory Flue Sealant to all clay flue liner systems. Clean & Etch is a hydrofluoric acid generator, which generates an acid etching material upon contact with clay flue liners (or any silica-containing surface) in as little as 15 seconds. It requires no neutralization or rinsing. Once Clean & Etch has dried, flue tiles are ready for coating.
Freeze Warning
Page 166
Submit your orders to: order@nesbestflex.com or (888) 900-8106
Powered by FlippingBook